Product Details | VARIABLE ATTENUATOR

5985-00-434-2235 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 1291029P1, 2954, 5985-00-434-2235, 00-434-2235, 5985004342235, 004342235

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 11 FEB 1972 00-434-2235

Drawings & Photos | NSN 5985-00-434-2235


Cross Reference | NSN 5985-00-434-2235

Part Number Cage Code Manufacturer
1291029P1 94117 BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
2954 93459 AEROFLEX / WEINSCHEL, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-434-2235

Technical Data | NSN 5985-00-434-2235

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 12.400 GIGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
VOLTAGE STANDING WAVE RATIO 1.20 AND 1.30 AND 1.35 AND 1.45 AND 1.50
POWER RATING 1.0 WATTS AVERAGE AND 500.0 WATTS PEAK
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 1.2
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 70.0
OVERALL ATTENUATION ACCURACY IN DECIBELS 0.00 TO 0.15
SEGMENT ATTENUATION RANGE IN DECIBELS 1.00 TO 9.00 AND 10.00 TO 19.00 AND 20.00 TO 29.00 AND 30.00 TO 39.00 AND 40.00 TO 49.00 AND 50.00 TO 59.00
SEGMENT ATTENUATION ACCURACY IN DECIBELS -0.40 TO 0.40 AND -1.00 TO 1.00 AND -1.20 TO 1.20 AND -1.40 TO 1.40 AND -1.50 TO 1.50 AND -1.70 TO 1.70
ATTENUATION VARIATION METHOD STEPPED
STEP POSITION QUANTITY 16
ATTENUATION PER STEP IN DECIBELS 1.0 AND 10.0
BODY STYLE 9A COAXIAL TYPE
OVERALL LENGTH 9.000 INCHES NOMINAL
OVERALL HEIGHT 3.380 INCHES NOMINAL
OVERALL WIDTH 5.000 INCHES NOMINAL
ADJUSTMENT DEVICE TYPE AND QUANTITY 2 KNOB
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, FEMALE

Restrictions/Controls & Freight Information | NSN 5985-00-434-2235

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code TA Sacramento Air Logistics Center
McClellan AFB, CA 95652-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable