Product Details | VARIABLE ATTENUATOR

5985-00-435-9756 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 784, 5985-00-435-9756, 00-435-9756, 5985004359756, 004359756

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 20 MAY 1974 00-435-9756

Drawings & Photos | NSN 5985-00-435-9756


Cross Reference | NSN 5985-00-435-9756

Part Number Cage Code Manufacturer
784 99899 L-3 COMMUNICATIONS CORPORATION DBA NARDA MICROWAVE EAST

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-435-9756

Technical Data | NSN 5985-00-435-9756

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 2.000 GIGAHERTZ MINIMUM AND 2.500 GIGAHERTZ MAXIMUM
VOLTAGE STANDING WAVE RATIO 1.50
POWER RATING 5.0 WATTS AVERAGE AND 2.0 KILOWATTS PEAK
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 1.0
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 120.0
OVERALL ATTENUATION ACCURACY IN DECIBELS -1.00 TO 1.00
ATTENUATION VARIATION METHOD CONTINUOUS
BODY STYLE 13A COAXIAL TYPE
OVERALL LENGTH 10.125 INCHES NOMINAL
OVERALL HEIGHT 2.312 INCHES NOMINAL
OVERALL WIDTH 4.000 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, FEMALE
COAXIAL CONNECTOR SERIES DESIGNATION N
MANUFACTURERS CODE 99899
DESIGN CONTROL REFERENCE 784

Restrictions/Controls & Freight Information | NSN 5985-00-435-9756

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code Q unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable