Product Details | VARIABLE ATTENUATOR

5985-00-458-9269 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 10554948, 434A, 5985-00-458-9269, 00-458-9269, 5985004589269, 004589269

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 02 JAN 1970 00-458-9269

Drawings & Photos | NSN 5985-00-458-9269


Cross Reference | NSN 5985-00-458-9269

Part Number Cage Code Manufacturer
10554948 19200 US ARMY ARDEC RDECOM
434A 80138 KAY ELEMETRICS CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-458-9269

Technical Data | NSN 5985-00-458-9269

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 0.000 GIGAHERTZ MINIMUM AND 1.000 GIGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
VOLTAGE STANDING WAVE RATIO 1.20 AND 1.40
POWER RATING 1.0 WATTS AVERAGE
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 0.2
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 99.0
OVERALL ATTENUATION ACCURACY IN DECIBELS -1.50 TO 1.50
ATTENUATION VARIATION METHOD STEPPED
STEP POSITION QUANTITY 18
ATTENUATION PER STEP IN DECIBELS 1.0 AND 1.0 AND 1.0 AND 1.0 AND 1.0 AND 1.0 AND 1.0 AND 1.0 AND 1.0 AND 10.0 AND 10.0 AND 10.0 AND 10.0 AND 10.0 AND 10.0 AND 10.0 AND 10.0 AND 10.0
BODY STYLE 9A COAXIAL TYPE
OVERALL LENGTH 6.376 INCHES NOMINAL
OVERALL HEIGHT 2.750 INCHES NOMINAL
OVERALL WIDTH 4.094 INCHES MAXIMUM
ADJUSTMENT DEVICE TYPE AND QUANTITY 2 KNOB
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, MALE
COAXIAL CONNECTOR SERIES DESIGNATION BNC
MOUNTING FACILITY TYPE AND QUANTITY 2 UNTHREADED HOLE
MOUNTING FACILITY PATTERN TWO POSITION IN-LINE
UNTHREADED MOUNTING HOLE DIAMETER 0.172 INCHES NOMINAL
DISTANCE BETWEEN MOUNTING FACILITY CENTERS 3.453 INCHES NOMINAL
TEST DATA DOCUMENT 19200-10554948 DRAWING

Restrictions/Controls & Freight Information | NSN 5985-00-458-9269

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating J 100.2
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable