Product Details | VARIABLE ATTENUATOR

5985-01-362-0532 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: MICA81S, MIC-A81S, IF/51022, IF51022, 1213636201, 1213636-201, 5985-01-362-0532, 01-362-0532, 5985013620532, 013620532

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 01 AUG 1992 01-362-0532

Drawings & Photos | NSN 5985-01-362-0532


Cross Reference | NSN 5985-01-362-0532

Part Number Cage Code Manufacturer
1213636-201 03538 LOCKHEED MARTIN CORPORATION DIV MST
1213636-201 56232 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
IF/51022 12457 MERRIMAC INDUSTRIES, INC
MIC-A81S 64537 AEROFLEX CONTROL COMPONENTS, INC. DBA AEROFLEX / KDI

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-362-0532

Technical Data | NSN 5985-01-362-0532

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE OR WAVEGUIDE
IMPEDANCE RATING IN OHMS 50.0 INPUT
VOLTAGE STANDING WAVE RATIO 1.40
SEGMENT ATTENUATION RANGE IN DECIBELS 0.00 TO 58.50
ATTENUATION VARIATION METHOD STEPPED
STEP POSITION QUANTITY 6
BODY STYLE 30A COAXIAL TYPE
OVERALL HEIGHT 1.200 INCHES NOMINAL
OVERALL WIDTH 5.760 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, PLUG
SPECIAL FEATURES ATTENUATOR ASSEMBLY,IF; BUILT-IN REGULATORS; OVERVOLTAGE PROTECTION; DECOUPLING FILTERS; RFI; MAX. WT.,NO GREATER THAN 32 OUNCES; OPERATING TEMPERATURE RANGE,0 DEG.C. TO +50 DEG.C.; NON-OPERATING,-35 DEG.C. TO +60 DEG. C.; CONNECTORS,SMA FEMALE,FLANGE MOUNTED
III END ITEM IDENTIFICATION NEXT GENERATION RADAR (NEXRAD)

Restrictions/Controls & Freight Information | NSN 5985-01-362-0532

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information