Product Details | VARIABLE ATTENUATOR

5985-01-508-8589 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 50DR063, 50DR-063, 5985-01-508-8589, 01-508-8589, 5985015088589, 015088589

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 04 JUN 2003 01-508-8589

Drawings & Photos | NSN 5985-01-508-8589


Cross Reference | NSN 5985-01-508-8589

Part Number Cage Code Manufacturer
50DR-063 61162 JFW INDUSTRIES INCORPORATED

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-508-8589

Technical Data | NSN 5985-01-508-8589

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 1100.000 MEGAHERTZ MAXIMUM
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 0.5
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 50.0
BODY STYLE 10A COAXIAL TYPE
OVERALL LENGTH 4.720 INCHES NOMINAL
OVERALL WIDTH 1.500 INCHES NOMINAL
ADJUSTMENT DEVICE TYPE AND QUANTITY 1 SHAFT
SHAFT TYPE ROUND, HOLLOWED
SHAFT DIAMETER 0.250 INCHES NOMINAL
SHAFT LENGTH 0.760 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, FEMALE
COAXIAL CONNECTOR SERIES DESIGNATION SMA
III OPERATING TEMP RANGE -20.0 TO 85.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5985-01-508-8589

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information