Product Details | VARIABLE ATTENUATOR

5985-01-576-2224 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 50DR008, 50DR-008, 5985-01-576-2224, 01-576-2224, 5985015762224, 015762224

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 24 JUL 2009 01-576-2224

Cross Reference | NSN 5985-01-576-2224

Part Number Cage Code Manufacturer
50DR-008 61162 JFW INDUSTRIES INCORPORATED

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-576-2224

Technical Data | NSN 5985-01-576-2224

Characteristic Specifications
OVERALL ATTENUATION RANGE IN DECIBELS +0.0/+11.0
PART NAME ASSIGNED BY CONTROLLING AGENCY DUAL ROTARY ATTENUATOR
POWER RATING 2.0 WATTS AVERAGE
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS 0.9
COAXIAL CONNECTOR SERIES DESIGNATION SMA
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 800.000 MEGAHERTZ MAXIMUM
OVERALL WIDTH 1.880 INCHES NOMINAL
OVERALL LENGTH 5.430 INCHES NOMINAL
OVERALL HEIGHT 1.750 INCHES NOMINAL
VOLTAGE STANDING WAVE RATIO 1.25
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, FEMALE
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
APPLICATION DESIGN TRANSMISSION LINE
BODY STYLE IRREGULAR

Restrictions/Controls & Freight Information | NSN 5985-01-576-2224

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information