NSN 5985-01-585-8000 TLRSA3511ODNR, TL-RSA-3511OD-N-R, 3201373
Product Details | VARIABLE ATTENUATOR
5985-01-585-8000 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
Part Alternates: TLRSA3511ODNR, TL-RSA-3511OD-N-R, 3201373, 32-01373, 5985-01-585-8000, 01-585-8000, 5985015858000, 015858000
Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 07 JUN 2010 | 01-585-8000 | 00838 ( ATTENUATOR, VARIABLE ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5985-01-585-8000
Technical Data | NSN 5985-01-585-8000
| Characteristic | Specifications |
|---|---|
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.138 INCHES |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 KNOB W/DIAL |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.50/+0.50 |
| POWER RATING | 2.0 WATTS AVERAGE |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0/+110.0 |
| BODY STYLE | CYLINDRICAL W/SIDE TERMINALS |
| SPECIAL FEATURES | SWITCHING LIFE: 200000 STEPS MINIMUM, CLOCKWISE ROTATION FOR INCREASING ATTENUATION IN 30 DEG INDEXING, HOUSING: ALUMINUM AND ZINC |
| STEP POSITION QUANTITY | 1 |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 1.5 |
| OVERALL WIDTH | 1.910 INCHES NOMINAL |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA AND BNC AND TNC AND N |
| ATTENUATION PER STEP IN DECIBELS | 1.0 |
| MOUNTING FACILITY PATTERN | FOUR POSITION DIAMOND |
| BODY LENGTH | 4.410 INCHES NOMINAL |
| ATTENUATION VARIATION METHOD | STEPPED |
| TERMINAL TYPE AND QUANTITY | 4 CONNECTOR, COAXIAL, MALE |
| OVERALL LENGTH | 5.810 INCHES NOMINAL |
| VOLTAGE STANDING WAVE RATIO | 1.30 AND 1.50 |
| FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 3.000 GIGAHERTZ MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| APPLICATION DESIGN | TRANSMISSION LINE |
| BODY DIAMETER | 1.670 INCHES NOMINAL |
Restrictions/Controls & Freight Information | NSN 5985-01-585-8000
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||