Product Details | DELAY LINE

5999-00-105-5199 An item which provides a predetermined delay to an electrical pulse, while maintaining substantially the same waveform. The delay is obtained by means of a real or artificial transmission line or equivalent device. The equivalent device may be acoustic, distributive, lumped constant, magnetic solid state, or surface acoustical wave type. See also ATTENUATOR, (as modified); TRANSFORMER, (as modified); and OSCILLATOR, PULSE DELAY.

Part Alternates: DL1308, 5999-00-105-5199, 00-105-5199, 5999001055199, 001055199

Electrical and Electronic Equipment Components | Miscellaneous Electrical and Electronic Components

Supply Group (FSG) NSN Assign. NIIN
59 01 JUL 1968 00-105-5199

Drawings & Photos | NSN 5999-00-105-5199


Cross Reference | NSN 5999-00-105-5199

Part Number Cage Code Manufacturer
DL1308 15003 VALOR ELECTRONICS INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5999-00-105-5199

Technical Data | NSN 5999-00-105-5199

Characteristic Specifications
SIGNAL DELAY METHOD LUMPED CONSTANT
DELAY TIME VARIATION METHOD TAPPED
INDIVIDUAL SECTION QUANTITY 1
SECTION DELAY TIME 450.000 NANOSECONDS NOMINAL SINGLE SECTION
OPERATING TEMP RANGE NOT RATED
DELAY TIME VARIATION PER DEG CELSIUS NOT RATED
INPUT IMPEDANCE RATING NOT RATED
OUTPUT IMPEDANCE RATING NOT RATED
VOLTAGE RATING 500.000 VOLTS NOMINAL
PULSE RISE TIME RATING NOT RATED
FREQUENCY RATING NOT RATED
FREQUENCY BANDWIDTH NOT RATED
BODY STYLE 1 RECTANGULAR
BODY LENGTH 3.010 INCHES MAXIMUM
BODY WIDTH 0.510 INCHES MAXIMUM
BODY DEPTH 0.500 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY 4 WIRE LEADS
MOUNTING FACILITY TERMINAL, WIRE-LEAD
MOUNTING FACILITY QUANTITY 4
MOUNTING PROVISION ARRANGEMENT STYLE 2 FOUR POSITION RECTANGULAR
LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS 2.900 INCHES NOMINAL
LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS 0.400 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5999-00-105-5199

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 658 unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable