Product Details | CONTROL MOTOR

6105-00-245-2151 A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also SERVOMOTOR, AUTOMATIC PILOT.

Part Alternates: 15MSPEC92, 6692637, 669263-7, 6105-00-245-2151, 00-245-2151, 6105002452151, 002452151

Electric Wire, and Power and Distribution Equipment | Motors, Electrical

Supply Group (FSG) NSN Assign. NIIN
61 09 JUL 1969 00-245-2151

Cross Reference | NSN 6105-00-245-2151

Part Number Cage Code Manufacturer
15MSPEC92 26257 TCI LLC
669263-7 56232 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6105-00-245-2151

Technical Data | NSN 6105-00-245-2151

Characteristic Specifications
OVERALL LENGTH 2.093 INCHES
OVERALL WIDTH 1.437 INCHES
LENGTH OF SHAFT FROM HOUSING 0.397 INCHES SINGLE END
MOUNTING METHOD CLAMP RING
MOUNTING FACILITY TYPE AND QUANTITY 1 CLAMP COLLAR
INCLOSURE FEATURE TOTALLY INCLOSED
INCLOSURE SPECIFICATION COMMERCIAL
CURRENT TYPE AC INPUT
CURRENT RATING IN AMPS 0.120 SINGLE INPUT
CURRENT RATING METHOD NO LOAD
FREQUENCY IN HERTZ 400.0 INPUT
PHASE SINGLE INPUT
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS 115.0 LINE TO NEUTRAL SINGLE INPUT
TORQUE RATING AND TYPE 1.4 INCH-OUNCES STALLED
TEMP RATING 65.0 AMBIENT DEG CELSIUS AND -54.0 OPERATING DEG CELSIUS AND 71.0 OPERATING DEG CELSIUS
COOLING METHOD NONVENTILATED
TERMINAL TYPE AND QUANTITY 6 SOLDER LUG
CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS 57.0 AC AND 115.0 AC
CONTROL FIELD CURRENT RATING IN AMPS 0.235 AND 0.120
CONTROL FIELD IMPEDANCE RATING IN OHMS 123.0 AND 490.0
ROTOR SPEED RATING IN RPM 4800.0 SINGLE NO LOAD
SHAFT END CHARACTERISTIC A17 SINGLE STYLE SINGLE END
SHAFT DIAMETER 0.1770 INCHES NOMINAL SINGLE END
FULL TOOTH LENGTH 0.4380 INCHES NOMINAL SINGLE END
TEETH QUANTITY 15 SINGLE END
FEATURES PROVIDED VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS AS DIFFERENTIATED BY NAVORD OD 41152
MANUFACTURERS CODE 56232
DESIGN CONTROL REFERENCE 669263-7

Restrictions/Controls & Freight Information | NSN 6105-00-245-2151

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 062120 GENERATORS/MOTORS/PARTS NOI
Less than car load rating Q 70
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code HD Naval Inventory Control Point
Mechanicsburg, PA 17055-0788
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable