Product Details | CONTROL MOTOR

6105-00-954-6535 A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also SERVOMOTOR, AUTOMATIC PILOT.

Part Alternates: CR01300660, SMD570105, 10228503855, 6105-00-954-6535, 00-954-6535, 6105009546535, 009546535

Electric Wire, and Power and Distribution Equipment | Motors, Electrical

Supply Group (FSG) NSN Assign. NIIN
61 16 MAY 1966 00-954-6535

Cross Reference | NSN 6105-00-954-6535

Part Number Cage Code Manufacturer
10228503855 89944 KOLLSMAN, INC.
CR01300660 88818 KEARFOTT CORPORATION DBA KEARFOTT
SMD570105 80063 US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6105-00-954-6535

Technical Data | NSN 6105-00-954-6535

Characteristic Specifications
OVERALL LENGTH 2.643 INCHES
OVERALL WIDTH 1.062 INCHES
OVERALL HEIGHT 1.062 INCHES
LENGTH OF SHAFT FROM HOUSING 0.260 INCHES SINGLE END
MOUNTING METHOD FACE
MOUNTING FACILITY TYPE AND QUANTITY 4 UNTHREADED HOLE
MOUNTING FACILITY CIRCLE DIAMETER 0.812 INCHES
INCLOSURE FEATURE TOTALLY INCLOSED
INCLOSURE SPECIFICATION COMMERCIAL
CURRENT TYPE AC INPUT
FREQUENCY IN HERTZ 400.0 INPUT
PHASE TWO INPUT
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS 115.0 LINE TO NEUTRAL SINGLE INPUT
TORQUE RATING AND TYPE 0.60 INCH-OUNCES STALLED
TEMP RATING 45.0 AMBIENT DEG CELSIUS AND -54.0 OPERATING DEG CELSIUS AND 125.0 OPERATING DEG CELSIUS
COOLING METHOD NONVENTILATED
TERMINAL TYPE AND QUANTITY 6 WIRE LEAD
CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS 36.0 AC AND 18.0 AC
CONTROL FIELD CURRENT RATING IN AMPS 0.169 AND 0.338
CONTROL FIELD IMPEDANCE RATING IN OHMS 372.0 AND 93.0
CONTROL FIELD WINDING TYPE TWO WINDINGS, PARALLEL CONNECTED
ROTOR SPEED RATING IN RPM 6000.0 SINGLE NO LOAD
SHAFT END CHARACTERISTIC A14 SINGLE STYLE SINGLE END
SHAFT DIAMETER 0.1250 INCHES NOMINAL SINGLE END
SPLINE LENGTH 0.2600 INCHES NOMINAL SINGLE END
FEATURES PROVIDED HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
MANUFACTURERS CODE 88818
DESIGN CONTROL REFERENCE CR01300660

Restrictions/Controls & Freight Information | NSN 6105-00-954-6535

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 062120 GENERATORS/MOTORS/PARTS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6105-00-954-6535

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each