Product Details | CONTROL MOTOR

6105-01-033-3649 A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also SERVOMOTOR, AUTOMATIC PILOT.

Part Alternates: 15D6CAB0A1, 15D6C-AB0-A1, 6105-01-033-3649, 01-033-3649, 6105010333649, 010333649

Electric Wire, and Power and Distribution Equipment | Motors, Electrical

Supply Group (FSG) NSN Assign. NIIN
61 04 JAN 1977 01-033-3649

Cross Reference | NSN 6105-01-033-3649

Part Number Cage Code Manufacturer
15D6C-AB0-A1 10651 VERNITRON CORP

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6105-01-033-3649

Technical Data | NSN 6105-01-033-3649

Characteristic Specifications
OVERALL LENGTH 3.351 INCHES
OVERALL WIDTH 1.437 INCHES
OVERALL HEIGHT 1.437 INCHES
LENGTH OF SHAFT FROM HOUSING 0.448 INCHES SINGLE END
MOUNTING METHOD FACE
MOUNTING FACILITY TYPE AND QUANTITY 4 THREADED HOLE
MOUNTING FACILITY CIRCLE DIAMETER 1.100 INCHES
INCLOSURE FEATURE TOTALLY INCLOSED
INCLOSURE SPECIFICATION COMMERCIAL
CURRENT TYPE AC INPUT
CURRENT RATING IN AMPS 0.150 SINGLE INPUT
CURRENT RATING METHOD LOCKED ROTOR
FREQUENCY IN HERTZ 60.0 INPUT
PHASE SINGLE INPUT
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS 115.0 LINE TO NEUTRAL SINGLE INPUT
TORQUE RATING AND TYPE 2.0 INCH-OUNCES STALLED
TEMP RATING -55.0 OPERATING DEG CELSIUS AND 125.0 OPERATING DEG CELSIUS
COOLING METHOD NONVENTILATED
TERMINAL TYPE AND QUANTITY 6 WIRE LEAD
CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS 20.0 AC AND 40.0 AC
CONTROL FIELD CURRENT RATING IN AMPS 0.550 AND 0.275
CONTROL FIELD WINDING TYPE TWO WINDINGS, SERIES CONNECTED OR TWO WINDINGS, PARALLEL CONNECTED
ROTOR SPEED RATING IN RPM 2700.0 SINGLE NO LOAD
SHAFT END CHARACTERISTIC A17 SINGLE STYLE SINGLE END
SHAFT DIAMETER 0.1771 INCHES NOMINAL SINGLE END
FULL TOOTH LENGTH 0.4480 INCHES NOMINAL SINGLE END
TEETH QUANTITY 15 SINGLE END
MANUFACTURERS CODE 10651
DESIGN CONTROL REFERENCE 15D6C-AB0-A1

Restrictions/Controls & Freight Information | NSN 6105-01-033-3649

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:JPILFERAGE - PILFERAGE CONTROLS MAY BE DESIGNATED BY THE CODING ACTIVITY TO ITEMS CODED U (UNCLASSIFIED) BY RECORDING THE ITEM TO J./
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:NThe item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input).
Category Code Description
NMF Description 062120 GENERATORS/MOTORS/PARTS NOI
Less than car load rating Q 70
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code CL U.S. Army Communications-Electronics
Fort Monmouth, NJ 07703-5006
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6105-01-033-3649

Category Code Description
Materiel Category and Inventory ManagerG Communications and Electronics Equipment, Electronics Materiel
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment1 REPARABLE ITEMS (Exclusive of Insurance and Provisioning Items.) This code will be used to identify serviceable or unserviceable items of a durable nature which when unserviceable normally can be repaired economically by depots or lower echelons of maintenance.
Specific Group/Generic Code4 Communications Systems Agency and Satellite Communications
Weapons Systems/End Item or Homogeneous Group4AAN/FSC-78/GSC-39
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplyB16US Army Communications-Electronics
Command and Fort Monmouth
Fort Monmouth, NJ 07703-5016
AgencyDADepartment of the Army
Service OrganizationLLead Service - 22 (Repairable)
ReparabilityHIf condemned or uneconomically repairable, then dispose at Intermediate level.
Acquisition Advice CodesXSEMIACTIVE ITEM-NO REPLACEMENT (NON-STOCKED ITEMS) A potentially inactive NSN which must be retained in the supply system as an item of supply because (1) stocks of the item are on hand or in use below the wholesale level and (2) the NSN is cited in equipment authorization documents TO & E, TA, TM, etc., or in-use assets are being reported. 1. Items are authorized for central procurement but not authorized for stockage at wholesale level. 2. Requisitions for in-use replacement will be authorized in accordance with individual Military Service directives. 3. Requisitions may be submitted as requirements generate. Repetitive demands may dictate an AAC change to permit wholesale stockage.
Controlled Item CodeYCOMMUNICATION/ELECTRONIC EQUIPMENT AND PARTS
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSSSU:AIR FORCE SATELLITE COMMUNICATIONS SYSTEM (AFSCS) GROUND EQUIPMENT
Source of SupplyJCD
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityTAF Recoverable Assembly Management System (AFRAMS)
Acquisition Advice CodesYTERMINAL ITEM #(NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
Controlled Item CodeJPILFERAGE - PILFERAGE CONTROLS MAY BE DESIGNATED BY THE CODING ACTIVITY TO ITEMS CODED U (UNCLASSIFIED) BY RECORDING THE ITEM TO J.
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes7GDepot level reparable electronic material to support
Naval Inventory Control Point, Space and Naval Warfare Systems Command, Mechanicsburg
Special Material Content9 Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions
Source of SupplyNRPNAVICP-ERP
700 Robbins Avenue
Philadelphia, PA 19111-5098
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
ReparabilityHDepot Level Reparable
Acquisition Advice CodesCSERVICE/AGENCY-MANAGED (Service/Agency use only.) # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
Controlled Item CodeYCOMMUNICATION/ELECTRONIC EQUIPMENT AND PARTS
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each