NSN 3040-01-125-6924 65265-02012-101, 01-125-6924, 6526502012101
Product Details | SHOULDERED SHAFT
3040-01-125-6924 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 65265-02012-101, 3040-01-125-6924, 01-125-6924, 3040011256924, 6526502012101, 011256924
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 01 FEB 1982 | 01-125-6924 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-125-6924
Demand History | NSN 3040-01-125-6924
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 65265-02012-101 | 2023-04-106 | 3 | DIBBS |
| 3040-01-125-6924 | 2022-11-319 | 19 | DIBBS |
| 3040-01-125-6924 | 2022-09-256 | 9 | DIBBS |
| 65265-02012-101 | 2021-10-279 | 13 | DIBBS |
| 65265-02012-101 | 2021-04-91 | 23 | DIBBS |
| 65265-02012-101 | 2021-03-87 | 14 | DIBBS |
| 65265-02012-101 | 2021-03-63 | 10 | DIBBS |
| 65265-02012-101 | 2019-05-126 | 82 | DIBBS |
| 65265-02012-101 | 2019-04-98 | 20 | DIBBS |
| ES3-DWG-1770 | 2019-04-98 | 20 | DIBBS |
| 65265-02012-101 | 2019-03-77 | 20 | DIBBS |
| ES3-DWG-1770 | 2019-03-77 | 20 | DIBBS |
| 65265-02012-101 | 2019-02-57 | 81 | DIBBS |
| ES3-DWG-1770 | 2019-02-57 | 81 | DIBBS |
| 65265-02012-101 | 2019-01-09 | 16 | DIBBS |
| 3040-01-125-6924 | 2018-08-225 | 26 | DIBBS |
| 3040-01-125-6924 | 2018-07-185 | 23 | DIBBS |
| 3040-01-125-6924 | 2018-01-25 | 36 | DIBBS |
| 3040-01-125-6924 | 2017-04-101 | 36 | DIBBS |
| 3040-01-125-6924 | 2016-07-186 | 23 | DIBBS |
| 3040-01-125-6924 | 2016-05-139 | 13 | DIBBS |
| 3040-01-125-6924 | 2016-03-69 | 22 | DIBBS |
| 3040-01-125-6924 | 2016-02-32 | 9 | DIBBS |
| 3040-01-125-6924 | 2015-11-316 | 7 | DIBBS |
| 3040-01-125-6924 | 2014-04-94 | 21 | DIBBS |
| 3040-01-125-6924 | 2014-01-07 | 29 | DIBBS |
| 3040-01-125-6924 | 2013-12-343 | 29 | DIBBS |
| 3040-01-125-6924 | 2013-11-312 | 10 | DIBBS |
| 3040-01-125-6924 | 2013-11-310 | 10 | DIBBS |
| 3040-01-125-6924 | 2013-07-205 | 38 | DIBBS |
| 3040-01-125-6924 | 2012-05-130 | 12 | DIBBS |
| 3040-01-125-6924 | 2012-03-87 | 19 | DIBBS |
| 3040-01-125-6924 | 2011-05-129 | 12 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-01-125-6924
Technical Data | NSN 3040-01-125-6924
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END STYLE | 86 CROSS DRILLED HOLE AND SPLINED |
| FIRST END SPLINE LENGTH | 1.181 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.9100 INCHES MINIMUM AND 0.9200 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 1.0365 INCHES MINIMUM AND 1.0390 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1360 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 86 CROSS DRILLED HOLE AND SPLINED |
| SECOND END SPLINE LENGTH | 1.250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.122 INCHES MINIMUM AND 1.123 INCHES MAXIMUM |
| OVERALL LENGTH | 25.630 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | FLIGHT SAFETY CRITICAL |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| MANUFACTURERS CODE | 21540 |
| DESIGN CONTROL REFERENCE | 65265-02012-101 |
Restrictions/Controls & Freight Information | NSN 3040-01-125-6924
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | F | The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP). |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | KE | Naval ICP Philadelphia, PA 19111 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-01-125-6924
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |