Product Details | SAFETY RELIEF VALVE

4820-00-912-6842 A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes VALVE (1), RELIEF, PRESSURE AND TEMPERATURE.

Part Alternates: 19831, 1983-1, 4820-00-912-6842, 00-912-6842, 4820009126842, 009126842

Valves | Valves, Nonpowered

Supply Group (FSG) NSN Assign. NIIN
48 24 JUN 1966 00-912-6842

Drawings & Photos | NSN 4820-00-912-6842


Cross Reference | NSN 4820-00-912-6842

Part Number Cage Code Manufacturer
1983-1 06177 PNEUDRAULICS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 4820-00-912-6842

Technical Data | NSN 4820-00-912-6842

Characteristic Specifications
MATERIAL ALUMINUM ALLOY BODY ALUMINUM ALLOY SEAT
STYLE DESIGNATOR C2 STRAIGHT THRU
MEDIA FOR WHICH DESIGNED HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE
MAXIMUM OPERATING PRESSURE 175.0 POUNDS PER SQUARE INCH SINGLE RESPONSE
MAXIMUM OPERATING TEMP 275.0 DEG FAHRENHEIT SINGLE RESPONSE
VALVE DISCHARGE FLOW RATE 40.0 GALLONS PER MINUTE
CONNECTION TYPE THREADED EXTERNAL TUBE 1ST END UNTHREADED EXTERNAL TUBE 2ND END
SEAT ANGLE 37.0 DEGREES 1ST END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED 0.625 INCHES 1ST END 0.750 INCHES 2ND END
THREAD SERIES DESIGNATOR UN 1ST END
NOMINAL THREAD SIZE 1.500 INCHES 1ST END
THREAD QUANTITY PER INCH 12 1ST END
THREAD DIRECTION RIGHT-HAND 1ST END
DISK LOADING METHOD SPRING
OPENING PRESSURE SETTING 135.0 POUNDS PER SQUARE INCH
MANUFACTURERS CODE 06177
DESIGN CONTROL REFERENCE 1983-1

Restrictions/Controls & Freight Information | NSN 4820-00-912-6842

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 127220 PRESSURE REG/RED/RELIEF VALVES NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 594 unknown
Originating Activity Code SG 403 SCMS/GUED
5215 Thurlow St, Suite 5, Bldg 70C
Wright-Patterson AFB OH 45433
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 4820-00-912-6842

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityPStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each