NSN 5305-01-618-7134 AIC618313, AIC618-3-13 , C20645313
Product Details | CLOSE TOLERANCE SCREW
5305-01-618-7134 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Part Alternates: AIC618313, AIC618-3-13 , C20645313, C20645-3-13 , SF116313, SF116-3-13 , VT10021313, VT10021-3-13 , GS1009313, GS1009-3-13 , 93926313, 93926-3-13 , 5305-01-618-7134, 01-618-7134, 5305016187134, 016187134
Hardware and Abrasives | Screws
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 2013122 | 01-618-7134 | 29294 ( SCREW, CLOSE TOLERANCE ) |
Demand History | NSN 5305-01-618-7134
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 93926313 | 2024-12-361 | 875 | United States |
| 93926-3-13 | 2024-09-259 | 1894 | DIBBS |
| AIC618-3-13 | 2024-09-259 | 1894 | DIBBS |
| GS1009-3-13 | 2024-09-259 | 1894 | DIBBS |
| SF116-3-13 | 2024-09-259 | 1894 | DIBBS |
| VT10021-3-13 | 2024-09-259 | 1894 | DIBBS |
| 93926-3-13 | 2023-12-351 | 257 | DIBBS |
| AIC618-3-13 | 2023-12-351 | 257 | DIBBS |
| GS1009-3-13 | 2023-12-351 | 257 | DIBBS |
| SF116-3-13 | 2023-12-351 | 257 | DIBBS |
| VT10021-3-13 | 2023-12-351 | 257 | DIBBS |
| 93926-3-13 | 2023-08-232 | 767 | DIBBS |
| AIC618-3-13 | 2023-08-232 | 767 | DIBBS |
| GS1009-3-13 | 2023-08-232 | 767 | DIBBS |
| SF116-3-13 | 2023-08-232 | 767 | DIBBS |
| VT10021-3-13 | 2023-08-232 | 767 | DIBBS |
| C20645313 | 2020-09-259 | 225 | United States |
| C20645313 | 2019-07-186 | 90 | United States |
| 5305-01-618-7134 | 2018-06-157 | 1 | DIBBS-RFPs |
| 5305-01-618-7134 | 2018-03-63 | 2864 | DIBBS |
| 5305-01-618-7134 | 2017-06-174 | 998 | DIBBS |
| 5305-01-618-7134 | 2017-06-165 | 998 | DIBBS |
| 5305-01-618-7134 | 2016-09-252 | 916 | DIBBS |
| 5305-01-618-7134 | 2016-08-244 | 916 | DIBBS |
| 5305-01-618-7134 | 2015-07-210 | 1229 | DIBBS |
| 5305-01-618-7134 | 2014-12-338 | 395 | DIBBS |
| 93926313 | 2014-04-104 | 412 | United States |
| 5305-01-618-7134 | 2014-04-93 | 412 | DIBBS |
| 5305-01-618-7134 | 2014-03-65 | 50 | DIBBS |
| 5305-01-618-7134 | 2013-09-267 | 900 | DIBBS |
| 5305-01-618-7134 | 2013-08-233 | 101 | DIBBS |
| 5305-01-618-7134 | 2013-08-218 | 101 | DIBBS |
| C20645313 | 2013-03-81 | 864 | US |
Cross Reference | NSN 5305-01-618-7134
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 93926-3-13 | 56878 | SPS TECHNOLOGIES, LLC DBA AEROSPACE DIVISION |
| 93926-3-13 | 80539 | SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP |
| AIC618-3-13 | 06725 | SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES |
| C20645-3-13 | 81755 | LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS |
| GS1009-3-13 | 1EM77 | B & B SPECIALTIES INC. DBA G S AEROSPACE DIVISION DIV GS |
| SF116-3-13 | 0K6Z0 | SATURN FASTENERS INC DIV ACUMENT |
| VT10021-3-13 | 06710 | VALLEY-TODECO, INC. |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5305-01-618-7134
Technical Data | NSN 5305-01-618-7134
| Characteristic | Specifications |
|---|---|
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| THREAD QUANTITY PER INCH | 32 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.363 INCHES NOMINAL |
| FASTENER LENGTH | 1.175 INCHES NOMINAL |
| MATERIAL | STEEL COMP H11 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND |
| MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH |
| HEAD STYLE | FLAT COUNTERSUNK |
| HEAD DIAMETER | 0.258 INCHES MINIMUM AND |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| GRIP LENGTH | 0.812 INCHES NOMINAL |
| GRIP DIAMETER | 0.188 INCHES MINIMUM AND |
| III END ITEM IDENTIFICATION | F16 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT 100 DEG REDUCED HD OFFSET CRUCIFORM 132 KSI MIN SHR |
Restrictions/Controls & Freight Information | NSN 5305-01-618-7134
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 096640 | SCREWS, IRON OR STEEL |
| Less than car load rating | ||
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | SU | Ogden Air Logistics Center Hill AFB, UT 84056-5609 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5305-01-618-7134
Air Force| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Materiel Management Aggregation Code | WF | SU:F-16 AIR COMBAT FIGHTER |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |