NSN 5340-00-839-3934 204011136001, 204-011-136-001, 2040111361
Product Details | ROD END CLEVIS
5340-00-839-3934 A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial
Part Alternates: 204011136001, 204-011-136-001, 2040111361, 204-011-136-1, 5340-00-839-3934, 00-839-3934, 5340008393934, 008393934
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1962 | 00-839-3934 | 03796 ( CLEVIS, ROD END ) |
Drawings & Photos | NSN 5340-00-839-3934
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-839-3934
Technical Data | NSN 5340-00-839-3934
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4140 OR STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,COND 4 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000,COND D1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 299-099-031,CB1,BELL HELICOPTER CO MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNF ROD CONNECTION |
| NOMINAL THREAD SIZE | 0.625 INCHES ROD CONNECTION |
| THREAD CLASS | 3A ROD CONNECTION |
| THREAD DIRECTION | RIGHT-HAND ROD CONNECTION |
| THREAD LENGTH | 1.560 INCHES MINIMUM AND 1.620 INCHES MAXIMUM ROD CONNECTION |
| STYLE DESIGNATOR | 8 CLEVIS |
| SHANK LENGTH | 2.110 INCHES MINIMUM AND 2.150 INCHES MAXIMUM |
| SHANK DIAMETER | 0.625 INCHES NOMINAL |
| OVERALL HEIGHT | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| OVERALL WIDTH | 1.568 INCHES MINIMUM AND 1.610 INCHES MAXIMUM |
| END RADIUS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| FORK SPAN WIDTH | 1.188 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 3.430 INCHES MINIMUM AND 3.450 INCHES MAXIMUM |
| FORK ARM THICKNESS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| FORK DEPTH | 1.170 INCHES MINIMUM AND 1.190 INCHES MAXIMUM |
| ROD CONNECTION BORE DIAMETER | 0.311 INCHES MINIMUM AND 0.316 INCHES MAXIMUM |
| ROD CONNECTION BORE DEPTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| HOLE DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| MANUFACTURERS CODE | 97499 |
| DESIGN CONTROL REFERENCE | 204-011-136-1 |
Restrictions/Controls & Freight Information | NSN 5340-00-839-3934
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | F | The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP). |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 094140 | CLEVISES IRON/STEEL |
| Less than car load rating | ||
| Less than truck load rating | U | 50.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5340-00-839-3934
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9Z | Navy-owned stocks of defense industrial material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | S9I | Defense Industrial Supply Center Philadelphia, PA 19111 |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |