Product Details | BAND PASS FILTER

5915-01-094-8756 An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Part Alternates: 08418, 5915-01-094-8756, 01-094-8756, 5915010948756, 010948756

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 17 MAY 1980 01-094-8756

Drawings & Photos | NSN 5915-01-094-8756


Cross Reference | NSN 5915-01-094-8756

Part Number Cage Code Manufacturer
08418 23386 THALES DEFENSE & SECURITY, INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-094-8756

Technical Data | NSN 5915-01-094-8756

Characteristic Specifications
REFERENCE FREQUENCY PER FUNCTION 455.0 KILOHERTZ BLANK
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS 3.0 BLANK
FREQUENCY BAND WIDTH PER FUNCTION 454.00 KILOHERTZ BLANK AND 456.00 KILOHERTZ BLANK
SOURCE IMPEDANCE RATING PER FUNCTION 5.0 KILOHMS BLANK
LOAD IMPEDANCE PER FUNCTION 5.0 KILOHMS BLANK
INCLOSURE TYPE HERMETICALLY SEALED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 PIN INPUT 1 PIN OUTPUT 2 PIN GROUND
STYLE DESIGNATOR 2 RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
OVERALL HEIGHT 2.415 INCHES NOMINAL
BODY LENGTH 3.225 INCHES NOMINAL
BODY HEIGHT 2.185 INCHES NOMINAL
BODY WIDTH 0.985 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 1 PLUG-IN
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION 449.00 KILOHERTZ BLANK AND 461.00 KILOHERTZ BLANK
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS 60.0 NOMINAL BLANK
MANUFACTURERS CODE 23386
DESIGN CONTROL REFERENCE 08418

Restrictions/Controls & Freight Information | NSN 5915-01-094-8756

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:PItem contains platinum family metals
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 069100 FILTERS:FILTERS,NOI SUB6
Less than car load rating J 100.2
Less than truck load rating J 100.2
Water commodity Code 72D unknown
Originating Activity Code TA Sacramento Air Logistics Center
McClellan AFB, CA 95652-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable