Product Details | BAND PASS FILTER

5915-01-130-8249 An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes a single inductance, or a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Part Alternates: 5915-01-130-8249, 01-130-8249, 5915011308249, 011308249

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 01-130-8249

Drawings & Photos | NSN 5915-01-130-8249


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-130-8249

Technical Data | NSN 5915-01-130-8249

Characteristic Specifications
REFERENCE FREQUENCY PER FUNCTION 9.0 GIGAHERTZ BLANK
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS 0.8 BLANK
FREQUENCY BAND WIDTH PER FUNCTION 7.00 GIGAHERTZ BLANK AND 11.00 GIGAHERTZ BLANK
SOURCE IMPEDANCE RATING PER FUNCTION 50.0 OHMS BLANK
LOAD IMPEDANCE PER FUNCTION 50.0 OHMS BLANK
VOLTAGE STANDING WAVE RATIO PER FUNCTION 1.4 BLANK
VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION 7.0 GIGAHERTZ BLANK AND 11.0 GIGAHERTZ BLANK
INCLOSURE TYPE ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 CONNECTOR, RECEPTACLE INPUT 1 CONNECTOR, RECEPTACLE OUTPUT
STYLE DESIGNATOR 20 RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
BODY LENGTH 0.700 INCHES NOMINAL
BODY HEIGHT 2.500 INCHES NOMINAL
BODY WIDTH 0.610 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 2 TERMINAL
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION 4.75 GIGAHERTZ BLANK AND 7.00 GIGAHERTZ BLANK AND 11.00 GIGAHERTZ BLANK AND 12.30 GIGAHERTZ BLANK
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS 50.0 MINIMUM BLANK AND 3.0 MAXIMUM BLANK AND 3.0 MAXIMUM BLANK AND 50.0 MINIMUM BLANK
III AVERAGE POWER RATING PER FUNCTION 5.0 WATTS BLANK
III OPERATING TEMP RANGE -55.0 TO 95.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5915-01-130-8249

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information