Product Details | SENSITIVE SWITCH

5930-01-584-7270 A switch with a quick-acting mechanism actuated by a highly delicate tactile contact. Includes membrane switch. Excludes SWITCH, FLEXIBLE; SWITCH, PRESSURE; and SWITCH, THERMOSTATIC.

Part Alternates: 7193K3, 5930-01-584-7270, 01-584-7270, 5930015847270, 015847270

Electrical and Electronic Equipment Components | Switches

Supply Group (FSG) NSN Assign. NIIN
59 05 MAY 2010 01-584-7270

Cross Reference | NSN 5930-01-584-7270

Part Number Cage Code Manufacturer
7193K3 3A054 MCMASTER-CARR SUPPLY COMPANY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5930-01-584-7270

Technical Data | NSN 5930-01-584-7270

Characteristic Specifications
MAXIMUM VOLTAGE RATING IN VOLTS 250.0 AC
SPECIAL FEATURES THE SWITCH SWITCHES ONE CIRCUIT FROM "OFF" TO "ON" OR "ON" TO "OFF" (SPDT) AND SPRING BACK (MOMENTARY). SWITCH IS RATED 5 AMPS AT 250 VAC AND HAS THREE SOLDER LUG TERMINALS. MAXIMUM VOLTAGE IS 250 VAC/30 VDC. HOUSING IS PLASTIC AND IS 0.36 INCH HT. X 0.78 INCH WD. X 0.25 INCH DP. THEY HAVE TWO 0.09 INCH DIA. MOUNTING HOLES SPACED 0.38 INCH CENTER TO CENTER (HARDWARE NOT INCLUDED). UL RECOGNIZED, CSA CERTIFIED, AND CE APPROVED.
UNTHREADED MOUNTING HOLE DIAMETER 0.090 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH 0.380 INCHES NOMINAL
BODY STYLE HOLE MOUNTED
ACTUATOR FREE POSITION HEIGHT 0.080 INCHES NOMINAL
BODY HEIGHT 0.400 INCHES NOMINAL
ACTUATOR STYLE LEAF
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT 0.400 INCHES NOMINAL
BODY LENGTH 0.780 INCHES NOMINAL
MOUNTING METHOD UNTHREADED HOLE
TERMINAL TYPE AND QUANTITY 3 BINDING POST
BODY WIDTH 0.250 INCHES NOMINAL
SWITCH ACTUATING FORCE 1.4 OUNCES NOMINAL
SWITCH RELEASE FORCE 1.3 OUNCES NOMINAL
ACTUATOR LENGTH 0.860 INCHES NOMINAL
ACTUATOR WIDTH 0.130 INCHES NOMINAL
ACTUATOR MOVEMENT 0.050 DIFFERENTIAL INCHES NOMINAL
CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE 5.000 AMPERES RESISTIVE AC
INCLOSURE TYPE FULLY INCLOSED

Restrictions/Controls & Freight Information | NSN 5930-01-584-7270

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code KE Naval ICP
Philadelphia, PA 19111
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5930-01-584-7270

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each