NSN 5950-01-183-3474 33229543, 3322954-3, 33298663
Product Details | RADIO FREQUENCY COIL
5950-01-183-3474 An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.
Part Alternates: 33229543, 3322954-3, 33298663, 3329866-3, 5950-01-183-3474, 01-183-3474, 5950011833474, 011833474
Electrical and Electronic Equipment Components | Coils and Transformers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 04 JUL 1984 | 01-183-3474 | 06338 ( COIL, RADIO FREQUENCY ) |
Cross Reference | NSN 5950-01-183-3474
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5950-01-183-3474
Technical Data | NSN 5950-01-183-3474
| Characteristic | Specifications |
|---|---|
| TERMINAL TYPE AND QUANTITY | 4 PIN |
| RATING METHOD | ELECTRICAL SINGLE COMPONENT SINGLE WINDING |
| DC RESISTANCE RATING IN OHMS | 100.000 SINGLE COMPONENT SINGLE WINDING |
| INDUCTANCE RATING | 103.00 MICROHENRIES MINIMUM AND 111.00 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING |
| QUALITY FACTOR | 30 MINIMUM SINGLE COMPONENT SINGLE WINDING |
| (NON-CORE DATA) FREQUENCY AT WHICH INDUCTANCE AND QUALITY FACTOR APPLIES | 10.0 KILOHERTZ SINGLE COMPONENT SINGLE WINDING |
| (NON-CORE DATA) MINIMUM SELF-RESONANT FREQUENCY | 80.0 KILOHERTZ SINGLE COMPONENT |
| MOUNTING METHOD | PLUG-IN AND UNTHREADED HOLE SINGLE GROUP |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING HOLE DIAMETER | 0.043 INCHES NOMINAL SINGLE GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| INCLOSURE TYPE | FULLY INCLOSED |
| BODY LENGTH | 0.580 INCHES NOMINAL |
| BODY HEIGHT | 0.492 INCHES NOMINAL |
| BODY WIDTH | 0.580 INCHES NOMINAL |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| III MAXIMUM OPERATING TEMP | 70.0 DEG CELSIUS |
| (NON-CORE DATA) CUBIC MEASURE | 0.142 CUBIC INCHES |
Restrictions/Controls & Freight Information | NSN 5950-01-183-3474
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||



