Product Details | ELECTRICAL-ELECTRONIC COMPONENT MOUNTING PAD

5999-01-033-5013 An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see INSULATOR, (as modified). Excludes HOLDER, (as modified); RETAINER, (as modified), and SPACER, PLATE.

Part Alternates: A10030DAP, 5999-01-033-5013, 01-033-5013, 5999010335013, 010335013

Electrical and Electronic Equipment Components | Miscellaneous Electrical and Electronic Components

Supply Group (FSG) NSN Assign. NIIN
59 07 JAN 1977 01-033-5013

Cross Reference | NSN 5999-01-033-5013

Part Number Cage Code Manufacturer
A10030DAP 07047 ROSS MILTON CO THE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5999-01-033-5013

Technical Data | NSN 5999-01-033-5013

Characteristic Specifications
OVERALL HEIGHT 0.038 INCHES NOMINAL
MATERIAL PLASTIC DIALLYL PHTHALATE
SPECIAL FEATURES 0.021 IN. BODY THK; 0.33 IN. DIA; 3 LEADS; BOTTOM FOOT HEIGHT 0.017 IN.; THRU HOLE W/ COUNTERSINK STYLE

Restrictions/Controls & Freight Information | NSN 5999-01-033-5013

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 000000 NO NMFC FREIGHT DESCRIPTION
Less than car load rating
Less than truck load rating Z No Rating
Water commodity Code 72D unknown
Originating Activity Code DX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable